Home > Sprays and Powders > Chemicals >

Universal Mold Coat
Universal Mold Coat

List Price: $19.95
Our Price: $11.95

Product Code: LUNMOLCOA


16 ounces [Add $32.95]
4 ounces
5 POUNDS [Add $94.50]


Universal Mold Coat 4oz.
Universal Mold Coat is a glass separator that is used on stainless steel and glazed ceramic slumping molds. After trying this primer on a glazed plate, every dish in your cupboard will be looked at differently! Stainless steel will never have to be heated and sprayed as with other primers.



Universal Mold Coat is a glass separator that needs to be mixed with latex or acrylic-latex paint and water; any color of interior or exterior acrylic-latex paint will work and only a small amount is needed. The mixing proportions are 2 parts Universal Mold Coat mix added to 1 part paint and 1 part water.

1/2 Cup Universal Mold Coat Mix (4oz.)

1/4 Cup latex paint

1/4 Cup water

Mix the water and latex paint together then add the powdered Universal Mold Coat. Mix with brush until smooth.

If you don’t have extra paint around the home, and you don’t want to borrow 1/2 cup from your neighbor, then you can purchase a small can of ‘KILZ’ from the hardware store. I use ‘KILZ’ basic interior primer because it’s available nationwide.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Sprays and Powders > Chemicals
Glass Fusing Supplies > The Lunstom Legacy
Glass Fusing Supplies > Shelf Primers - Fiber Papers