Bar Kits ...... Just Add Glass!!
this kit it is easy to make your own intricate Flow Bars. Just coat the interior
with Fuse Master Shelf Primer, stack some strips of glass on the stainless
steel rods and fire in the kiln. As the glass softens and flows over the rods
into the container below, the pattern swirls and moves creating unique designs
that can be consistent throughout the length of the finished glass bar. The results
are beautiful and breathtaking glass pattern bars that can be sliced on a diamond
saw to reveal their inner design.
Basic kit includes 2 – pre-drilled soft brick end pieces 2 7/8" wide , 2- stainless steel
rods, 2 – fiberboard walls, instructions and firing schedules. This kit is for
smaller kilns. The rods and walls are 12” long.
you have a bigger kiln you may want the 24” long kit. The longer the bar, the
more slices you will have to work with.
- $29.95 – Designed for smaller kilns,
the rods and walls are 12” long so the minimum kiln shelf size is 6” x 13” it
will work on a 13” round shelf or in a square kiln like the Studio Pro 14 or Fire Box 14.
FLOBAR24 – $ 39.95 - If you have a larger kiln the 24” long rods and walls are the way
to go. You can fit several of these in an oval kiln like the Skutt GM1414 or
the Evenheat GM-2541.
sides need to be supported or they will fall over. We suggest the you use two
kiln post at least 1 5/8” x 1 5/8” x 5” on each side to hold up the walls. If you
don’t already have large enough kiln posts, order them now. These 5” long kiln posts are just $7.20 each.
is important the container part of this set up be coated with a high quality
Shelf Primer. We recommend Fuse Master Shelf Primer. A 12 ounce bag is only
diamond saw is ideal for cutting your Flow Bars. Here is a great deal on a
quality Gryphon Diamond Slicer only $499.95.