 |
 |
 |
 |
|
 |
|
Features
- Made with 100% Bullseye Glass, using special techniques to minimize heatwork and preserve compatibility with COE 90 glasses.
- Each hand-pulled 12" cane is 4 to 7 mm in diameter, consistent from end to end (less than 1mm variation in diameter for any single piece). Great for any project, they can be cut to just the right size.
- How To Use:
- You can get a variety of fusing results by setting up your base glass differently. Try these techniques and others to find out what you like best:
- 1. Use a 6mm flat base (two layers of 3mm sheet). Place cane on top and full fuse.
- 2. Try a 3mm base. Place cane on top with 6mm glass rod sections filling the spaces between. Full fuse.
- 3. Use sheet glass strips instead of 6mm rod to fill the space between canes. Full Fuse.
- 4. Single 3mm sheet base. Place the cane on top and full fuse.
- Technique No. 1 is recommended for Striped Cane (C100 series cane)
- Techniques No. 2 and 3 are recommended for Ribbon Cane (C200 series cane)
- Any technique is recommended for Streamer Cane (C300 series) but results will vary with each technique.
|
|
|
|
|
|
|
|
|
