Universal Mold Coat
Universal Mold Coat is a glass separator that is used on stainless steel
and glazed ceramics. After trying this primer on a glazed plate, every dish in
your cupboard will be looked at differently! Stainless steel will never have to
be heated and sprayed as with other primers.
INSTRUCTIONS AND INFORMATION
Universal Mold Coat is a glass separator that needs to be
mixed with latex or acrylic-latex paint and water; any color of interior or
exterior acrylic-latex paint will work and only a small amount is needed. The
mixing proportions are 2 parts Universal Mold Coat mix added to 1 part paint
and 1 part water.
1/2 Cup Universal Mold Coat Mix
1/4 Cup latex paint
1/4 Cup water
Mix the water and latex paint together then add the
powdered Universal Mold Coat. Mix with brush until smooth.
If you don’t have extra paint around the home, and you
don’t want to borrow 1/2 cup from your neighbor, then you can purchase a small
can of ‘KILZ’ from the hardware store. I use ‘KILZ’ basic interior primer
because it’s available nationwide.