Aides in scoring angles and straight edges to create basic shapes or strips.

This product was designed with the same principles as the Cutter's Mate: simplicity, comfort and ease in scoring. The compass dial and rests, resembling beetles, provide ease of cutting from either side of the work surface, or a straight cut perpendicular from the base ruler.

Features of the Beetle Bits Glass Cutting System:

• Wear-resistant straight edge, excellent for strips
• Compass indicates all popular angles for basic shapes
• Designed for use with the Waffle Grid surface

Includes:

• Oil well
• 2 Adjustable-angle rests -- one for each side of the work surface
• 1 Stationary straight edge rest
• 1 Swiveling rest, functioning as the compass dial
• 2 Multi-directional glass stops
• 18" Ruler
• 23" Straight edge

To obtain best results and accuracy for the measurements on the documents below, please make sure your printer settings are set at 1000/0 or full page, when printing.
Downloadable Diamond Master Sheet

The Flying Beetle Glass Cutter

The Flying Beetle Glass Cutter is designed for use with the Beetle Bit Glass Cutting System. The cutting head is always at a perfect 90 degree angle to the glass giving you a perfect score every time. All you need to do is press down on the button to engage the carbide cutting wheel with the glass. The Flying Beetle glides effortlessly back and forth on the straight edge bar. The bright colored pointer is in direct alignment with the lines of The Waffle Grid. (by Creator's Stained Glass) so you will know exactly where the score line is going to be. This is an oil-less system, but you may dip the cutting wheel if desired. The Flying Beetle is made from impact resistant polycarbonate. Replacement heads are available as the Toyo TC-10.